Send enquiry to Springcoil Ltd.
Die Springs
ManufacturingSold by Springcoil Ltd.
Longer life Die Springs or High Force Compression Springs are made of pre-tempered, rectangular shaped chrome silicon wire. The springs are designed for use where high loads are required and in applications where ambient temperatures reach 475 degrees F.
The springs are stress relieved after coiling, preset and shot peened to provide maximum fatigue life. Both ends are precision ground and then powder coated with a solid colour to identify the duty range.
There are many Die Springs or High Force Compression Springs available from stock. There are four duty ranges with sizes ranging from 3/8″ OD ( 10mm ) to 2″ OD (50 mm ) and lengths from one inch to 12 inches. ( 25 to 300 mm )
The diagram below will help you specify the important parameters for your Die spring.
If you know the loading you require or if you just need further information, our technical department will be pleased to advise the springs which are available from stock.
Click on our Trade Link for more information.
Compression, Die, Force, high, springs Product code: Die Springs
View Product
Sold by:
Website
Visit Profile
Springcoil Ltd.
0114 273 1111
2 Woodbourn Hill
Sheffield
South Yorkshire
S9 3NE
More products from Springcoil Ltd.
Wire Forms & Pressings
Wire Forms Wire forms come in a huge variety of shapes and sizes which, using …
Engineering
Suspension Springs & Anti-Roll Bars
All our Suspension springs are made here in Sheffield from the finest High duty Dynamic …
Manufacturing
Torsion Springs
Torsion Springs In this type of spring the the torsional force is applied to the …
Manufacturing
Suspension Springs
Suspension Springs The finest High Duty Dynamic materials are used to manufacture all our Suspension …
Manufacturing