Send enquiry to Caldo Consultants

 
By submitting this form, you agree for Trade Pages to send your data to the business listed. They will reply directly to you. We will never share your data with anyone else.

Complete Pollution Control Systems by Caldo Consultants

Complete Pollution Control Systems

Oil & Gas

Regulated Emissions to Atmosphere

Waste gases are often hot and, if they contain fume or dust, Caldo hot gas filters can be used to remove these solids before the gases are released to atmosphere. However, such gases often also contain other pollutants; ceramic filtration can be combined with other techniques to ensure that all of the controlled substances stay within regulatory limits.

Typical waste gases can contain the following classes of pollutants:

  • particulates, such as dust, fume, heavy metals and condensed salts
  • acid gases, such as SOx, HCl and HF
  • products of incomplete combustion, VOCs and CO;
  • the ingredients for the formation of 'de novo' dioxins and furans.

With one or two minor exceptions all of these can be controlled / removed by equipment based around a hot gas filter.

The emission of particulates is prevented by passing the gas through a ceramic filter.The filter is at the heart of all the pollution control systems supplied by Caldo. The particulate removal efficiency of ceramic filters greatly exceeds all regulatory requirements.

Dry Scrubbing

A major category of regulated pollutants is acid gases as listed above. In the atmosphere these gases dissolve in water to produce the acid rain which is so harmful to the natural environment.

Dry scrubbing is a technique for removing components from a gas by reacting them with a solid and then filtering the gas to remove the solid. For acid gas removal there is a choice of reactive solids between sodium bicarbonate and hydrated calcium oxide (Ca(OH)2 – commonly called called lime); sodium bicarbonate works best at lower temperatures whereas lime is substantially cheaper.

Caldo has pioneered the use of lime at a higher temperature, 400 degC, in conjunction with ceramic filtration to remove it from the gas stream. Operation at this temperature greatly increases the acid gas removal efficiency, reducing operating costs to a minimum.

Caldo has developed a powder feeder for controlling the addition of lime to the gas stream. This compact unit can be sited in a convenient location and it will blow the the metered amount of lime through a small diameter pipe into the inlet duct to the filter.

Secondary Combustion

Also known as afterburning, this is generally the first operation performed on the waste gas. It is done in order to complete the combustion of volatile organic compounds (VOCs) and carbon monoxide (CO) that may remain after the initial burning. It involves heating the gas to 850 degC in the presence on at least 6% of oxygen for a period of at least 2 seconds.

In the past the supplier of the primary combustion stage often also produced the secondary. Increasingly, however, Caldo is being asked to supply complete pollution control systems, including the afterburner. We now supply gas or oil fired afterburners to our own design with a choice of refractory linings.

NOx Removal

Dry scrubbing is insufficiently effective for NOx removal and an alternative technique, selective non-catalytic reduction (SNCR), must be used. This involves reacting the NOx with ammonia, NH3, at a temperature of about 850 degC. The products of the reaction are nitrogen, N2, and water, H2O, which are both perfectly safe to emit to atmosphere.

The technical challenge for Caldo was to identify and engineer a system for delivering the NH3 safely and effectively into the process. Ammonia is a toxic chemical, dangerous to ship and store so Caldo sought an alternative. Fortunately a common fertiliser, urea, is soluble in water, decomposes to ammonia when heated and is available as a prilled solid, very safe to handle and ship. Caldo developed the equipment to dissolve the prills in water and spray the solution into the process gas at a controlled pressure.

Complete, Control, Pollution, Removal, systems Product code: Pollution Control Systems
View Product
Caldo Consultants Logo
Sold by:

Caldo Consultants

0.0
Rated 0 out of 5
Website Visit Profile
01527 579000 1 Worcester Court Saxon Business Park Bromsgrove Worcestershire B60 4FH
Hot Gas Filter Components by Caldo Consultants

Hot Gas Filter Components

Ceramic Filter Components from Caldo Ceramic Filter Elements Caldo hot gas ceramic filter elements are …
Oil & Gas
Hot Gas Filters by Caldo Consultants

Hot Gas Filters

Description Caldo hot gas filters are high temperature equipment items for the continuous removal of …
Oil & Gas
Specialised Incinerators by Caldo Consultants

Specialised Incinerators

Collaboration with EODS One of the first pollution control systems that Caldo supplied was for …
Oil & Gas
Trade Pages
Shopping cart0
There are no products in the cart!
Continue shopping
0